一种全局运动的图像处理算法研究

在摄像机进行航拍的图像处理系统中,由摄像机运动所引起的视频运动,背景变化是主要特点。在进行图像采集时,每个像素都在变化,采用传统的图像编码方式进行图像压缩,压缩效果比较差。提出了基于块分割的精确运动估计算法,它是一种很好的图像压缩方法。     

Analysis on Shack–Hartmann wave-front sensor with Fourier optics

In Shack–Hartmann wavefront sensor (SHWS), the behavior of the irradiance pattern produced by the micro-lens array is important for an accurate centroid estimation. In this paper, the behavior of a micro-lens array in SHWS is analyzed using Fourier optics, and reveals that in addition to the main, expected spots, secondary spots with smaller intensities also appeared as a result of diffraction by the small dimensions of the micro-lens and interference from the different micro-lenses. This result is confirmed by comparing with a irradiance pattern taken from an actual SHWS. The additional error in centroid estimation caused by these secondary spots is discussed and relationship to the parameters of the micro-lens of SHWS is analyzed.     

脉冲压缩光栅光路调节新方法研究

介绍了一种简单而实用的大口径脉冲压缩光栅光路调节方法,有效解决了普通光路调节方法中轴向调节精度不高的问题。首先由全息透镜(光栅)成像公式出发,推导出了该光路调节的基本原理。并从光栅记录系统与光栅衍射波像差的关系,结合初级像差理论推导得出叠栅条纹像差为0.4786λ,大约是光栅衍射波像差(0.25λ)的两倍,利用此关系也可对光栅衍射波像差进行实时监测。从数值模拟结果可知,利用叠栅条纹法调节光路可将光栅波像差减至0.06λ,相应的轴向误差量为0.007 mm,可有效提高了轴向调节精度。     

一种适于自适应光学的旋转软刀口波面传感器的研究

利用傅里叶光学理论,证明了一种新型波面传感器——旋转软刀口波面传感器的概念.在经典刀口法的刀口区,以渐变透过率代替突变透过率函数,在光瞳象面上可获得反映光瞳面位置待测波面位相梯度及位相梯度方向的调制信号.文中给出了实验结果和讨论.     

透射电镜薄样品倾转过程中的附加旋转及其计算

模拟透射电镜双倾台进行样品位向调整过程,推导出反映样品倾转前后其合成倾转轴(即共有菊池线对的法线)方向变化规律的计算公式,称为附加旋转角计算公式。指出,实现样品位向调整的双倾操作,等效于样品绕其合成倾转轴的倾转及该倾转轴绕Z轴(平行入射束方向)的旋转之和。利用双倾台对薄膜样品进行的系列倾转实验表明,由附加旋转角公式计算的附加旋转角和实测值相一致。还根据双倾操作过程导出了合成倾转角的计算公式,它可用于判断样品位向调整的准确度。     

Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

Highly tilted antiferroelectric (R) enantiomers useful for the formulation of eutectic mixtures

ABSTRACT

Novel chiral three-ring (R) enantiomers were synthesised using optically active (R)-(?)-2-octanol. Properties, such as the sequence of phases, the transition temperatures and enthalpies, were tested by a polarising optical microscope and differential scanning calorimeter. An antiferroelectric smectic phase (SmC_A*) with a direct transition from the antiferroelectric to the isotropic phase (SmC_A*-Iso) was observed for three esters with an achiral C₃F₇CH₂O(CH₂)₃O– terminal chain. Bi- and multicomponent mixtures with a broad temperature range of the antiferroelectric phase and good electro-optical properties were formulated. Helical pitch of pure esters and mixtures was measured by spectrophotometry method.     

Design and fabrication of 2 kHz nematic liquid crystal variable retarder with reflection mode

ABSTRACT

This study proposes a simple method of designing a high-speed liquid crystal variable retarder (LCVR) with reflection mode. First, a series of simple formulas is provided for analysing the effects of tilt incidence and birefringence of the liquid crystal on the phase retardation and response time of the LCVR. Then, a reflective LCVR is fabricated to validate the theoretical analysis. Measured results show that the response speed can reach 2.7 kHz with a phase retardation of 1 λ. Furthermore, the theoretical curve is close to the measured curve while the incident angle is less than 10°. However, the theoretical and measured values show a considerable difference under a large incident angle. This problem is discussed, and a modified method is given. This work is helpful for the design and fabrication of high-speed LCVR.     

Cathode of a fuel cell with a solid polymer electrolyte: Calculating overall currents in the presence of a gas-diffusion layer

Mathematical apparatus, which makes it possible to perform calculations of the current-voltage characteristics of cathodes of fuel cells with a solid polymer electrolyte in conditions where there are present extraneous diffusion restrictions is proposed. In so doing, the partial pressure of oxygen and the absolute pressure of gas in the gas chamber may assume any values. First of all presented are the results of calculations of the current-voltage characteristics intrinsic to active layers of the air and oxygen cathodes, which are performed under the assumption that the extraneous diffusion restrictions are absent altogether. Thereafter, in the same conditions (at the same parameters that characterize the active layer of a cathode), obtained are results of a calculation of the current-voltage characteristics inherent in the air and oxygen cathodes in the presence of extraneous diffusion restrictions. Afterward there is performed an analysis of the way a gas-diffusion layer restricts the process of generation of current in a cathode and of what measures should be taken in order for the extraneous diffusion restrictions to become less significant.